Jasic MIG 350 Synergic Pulse Water Cooled MIG – Ex Hire & Refurbished

£2,500.00 exc VAT

The Jasic MIG 350 synergic pulse water cooled MIG welder can be used on all materials such as mild steel to reduce spatter (up to approx. 12mm to 12mm before needing spray transfer), but mainly used on aluminium and stainless for the below reasons:

  1. Protects the base parent metal from unnecessary weld heat input (controlled droplets) / prevents warp and distort.
  2. Better penetration.
  3. Faster deposition rate (quicker welds).
  4. Neater / more precise / better controlled welds.
  5. Less spatter / fume.

JASIC MANUAL PAGE 33 :  5. Voltage trim control dial

The voltage trim (Located on the wire feed unit), can be used to fine-tune the voltage parameter within a synergic program you have setup. By rotating the dial clockwise, you will increase the voltage by a maximum of 9.9V; this will give the effect of having less wire and a longer arc length. In contrast, rotating the dial anticlockwise will reduce the voltage by a maximum of -9.9V; this will give the effect of having more wire and a shorter arc length.  When the display reads 0.0, you are at the standard synergic setting.

All fully refurbished inc. 6 months warranty (Brand new @ £4,700 + VAT inc. 5 years warranty).

These have been decent hire plant pulsed MIGs and haven’t let us down. 2 off ex-hire fleet machines in stock, and we usually need a few days to service, clean down, check and weld test.

Product Description

Key Features

  • IGBT multi process Inverter
  • Synergic MIG/MAG pulse, double pulse and DC MMA
  • DSP digital technology for optimum welding performance
  • 4 Roll wire feed unit
  • Easy parameter settings for the operator
  • Synergic curves for common materials & wires
  • Self-diagnostic system
  • Encoder feedback control of wire feed system
  • Integrated water cooling system
  • Inverter trolley takes full size gas bottle

Package Includes

    • Machine / feeder / water cooler / trolley complete
    • Cooler filled with Glycol torch coolant
    • MB501 x 3mtr water cooled MIG torch c/w steel liner
    • 600amp x 5mtr 70mm² earth lead
    • 2mtr interlink (machine to feeder reach)
    • 2mtr 20bar 6mm ID 3/8th nut argon hose
    • 415v 32amp 5-pin red plug
    • 1.0mm – 1.2mm V-Groove solid MIG wire drive rollers
    • 1.2mm – 1.6mm U-Groove aluminium wire MIG wire drive rollers
    • 1 off, 3mtr x 1.2-1.6mm polyamide Teflon liner for aluminium & flux-cored wire
Want more information? Call us...
01246 205 267 info@spectrumweldingsupplies.co.uk
Used Equipment

Used Welding Equipment

Cooling system

Water Cooled

Supply Voltage

415V

Used Welders

Pulse Mig Welder

Reviews

There are no reviews yet.

Be the first to review “Jasic MIG 350 Synergic Pulse Water Cooled MIG – Ex Hire & Refurbished”

Your email address will not be published. Required fields are marked *