ESAB Rebel™ EMP 205ic AC/DC 110-240v all-in-one welder

(1 customer review)

£2,800.00 exc VAT

The new ESAB Rebel EMP 205ic. The best TRUE-all-in-one MIG/ACDC HF TIG/Stick portable multi-process welding machine.

We have in stock available to buy the incredible ESAB Rebel EMP 205ic, a flagship bit of kit designed to produce top quality welds.

We’ve tested these machines extensively, and it’s Smart Synergic MIG mode has been very well designed. It’s very quick and easy to use, allowing for a higher standard MIG weld from start to finish, with less spatter, better penetration, with perfect crater fill.

When used on AC aluminium TIG, you won’t get better results on material up to 6mm to 6mm.


Effortlessly direct more energy into the aluminium workpiece, remove heat from the zirconiated white tip tungsten to avoid balling and damage, create a smaller and more controlled bead profile, improve penetration, and reduce preheat on thick material. Only with the Rebel 205.

Part no. 0700300998


Product Description

Despite being a 5 in 1 MIG/HF ACDC TIG/Stick welder, the best feature on the Rebel EMP 205ic, would have to be the AC HF TIG mode. ESAB have incoportated ‘independant amplitude offset’ (which is a secondary AC balance setting feature). This advanced parameter settings allows the operator to easily adjust the heat input into the torch / earth, meaning you sharpen a zirconiated white tip tungsten when welding aluminium (and not have to let it ball over). This is probably the best AC TIG welder we’ve tested, and produced some stunning aluminium welds.

This is the same type of AC TIG technology the £8,000 + VAT Miller Dynasty 400 AC/DC TIG has in it’s arsenal, so this Rebel 205 really does come packed with some special features.

See the full spec sheet for the ESAB Rebel EMP205.

See the page on ESAB website.

Want more information? Call us...
01246 205 267

Additional information

  • 110V
  • 240V
  • 32amp blue 240V plug needed for welding @ full power 1.0mm MIG wire 4.0mm electrodes / 3.2mm zirconiated tungtens
  • MMA stick welder
  • Capable of welding OK 48.00 7018 low-hydrogen and OK 27.08 Nufive 6011 cellulosic electrodes
  • MIG welder
  • MIG 'Smart' Synergic welder
  • MIG feeder drive rollers capable of 0.6mm/0.8mm/1.0mm solid wire, 0.8mm flux-cored self-shielding galsess wire, and 1.0mm aluminium.
  • HF DC TIG mild steel / stainless welder
  • HF AC TIG aluminium welder
  • Special AC TIG 'Ampliture Offset' settings
  • Digital display
  • User friendly
  • Rugged and hard wearing steel unibody construction and 5 handle roll cage.
Weight 22 kg
Equipment Type

MIG Welding, TIG Welding



MIG Feeder Reach


Supply Voltage

110V, 240V

1 review for ESAB Rebel™ EMP 205ic AC/DC 110-240v all-in-one welder

  1. Joe Fitzpatrick

    A phenomenal bit of kit, and the best single-phase MIG / Synergic MIG / AC HF TIG / DC HF TIG / MMA stick / dual-voltage single-phase welder machine money can buy.

    1. The MIG weld mode is the best we’ve seen on any machine.
    2. The Synergic Smart MIG is the best we’ve seen on any machine.
    3. The AC TIG features “amplitude offset – the next level in AC TIG adjustment”. As good as Miller Dynasty 400 AC/DC (only not as powerful, not water-cooled, and not £8,000 net).
    4. As heavy duty and robust as it comes, designed to survive any environment.

    A must buy for all workshop and portable site welding requirements, that doesn’t require 500amp high-powered water-cooled welding equipment.

    Tried and tested, nothing in its class comes close to the Rebel EMP 205ic 5 in 1.

Add a review

Your email address will not be published. Required fields are marked *