HIRE 4X 12T JAWS @ £200 p/week

+ 10 TONNE POSITIONER @ £600 p/week

Face plate jaws are designed for clamping extra wide jobs, whereby you can fit the jaws far out towards the edge of a welding positioner table. When these jaws are bolted to an ‘X’ jig (see picture here), where the steel beams go beyond the edge of the table, and the X-Jig is then bolted to the table, there is no diameter limited to how wide you can clamp.

These 325mm face plate clamping jaws that can accommodate up to 12 tonnes (see load chart below).

The benefit of having 4 off independent jaws is that you can set each one up for ‘offset‘ clamping. This means you can attach a job ie. a pipe to any each of the table surface (doesn’t have to be the centre), which gives you the opportunity to create counter-balance (if there is a elbow joint sticking out), and prevent a job from fouling on the floor once titled & rotated.

Supplied as a set of 4 inc. winding key (mounted to welding positioner table).

Email us to set an account up and hire straight away.