SPECS:

• 450amps @ 60% duty
• Capable of 8.0mm gouging carbons MAX (400amps needed)
• Do not use past 400amps @ 100% to avoid burnout

500AMP MIG PACKAGE @ £350 P/WEEK INCLUDES

• 500mp diesel welder generator
• ESAB Robustfeed AVS site feeder with welder socket & coupler
• inc. 3/8th hose fitting + 7mtr reference lead clamp
• Setup for 1.0mm/1.2mm solid/1.2mm/1.6mm flux-core wire
• MB36 x 3m or 4m air cooled MIG torch (300amps @ 40% duty)
• 600amp x 5mtr x 70mm² earth lead
• 15mtr x 70mm² copper cable extension leads (x2)
• inc. 70-95mm² welder plug & sockets
• 20bar x 15mtr x 6mm ID argon hose
• inc. 3/8th fittings & male/male couplers (x2)
• 10 bar argon regulator & 40ltr flow meter + gas flow tester

500AMP ARCAIR GOUGING PACKAGE @ £400 P/WEEK INCLUDES

• 500mp diesel welder generator
• 800amp K4000 gouging torch c/w whip leads
• 600amp x 5mtr x 95mm² earth lead
• 15mtr x 95mm² copper cable extension leads (x2)
• inc. 70-95mm² welder plug & sockets
• 20bar x 15mtr x 10mm ID argon hose
• Inc. PCL BSP male & female quick release air fittings
• Jaymac claw fitting whip lead for diesel compressors
• Jaymac ½ – 1 ¼” Steel Whip Check Device

OPTIONAL HIRE EQUIPMENT

• Site tow trailer available upon request @ £50 p/week
• 25m remote available upon request @ £50 p/week
• + 15m +&- MIG cable reach available upon request @ £50 p/week
• + 15m +&- ARCAIR cable reach available upon request @ £50 p/week
• Spare K4000 air arc gouging torch & whip @ £50 p/week
• ESAB Tweco No.4 400amp air cooled heavy duty torch @ £50 p/week
• Drip tray / oil nappy @ £50 p/week
• MMA electrode cable upgrade (for MIG & MMA) @ £50 p/week

NOTE. When air arc gouging, you CAN NOT air arc gouge and run a compressor off the auxiliary at the same time. It’s either or.